LK Automation Limited LK Automation Limited
Brand Sort: Yaskawa
Home >> Price
SGMGH-09A2C2E Market price | SGMGH-09A2C2E Introduction
  • Brand: YASKAWA
  • Country:
  • Name: Motor for high precision machine tool
  • Model: SGMGH-09A2C2E
  • Price: 0
  • >
YASKAWA SGMGH-09A2C2E
High performance, use the best type of servo unit (high performance).
Maximum applicable motor capacity: 1.5kw.
Power supply voltage: single phase AC200V.
Design sequence: A.
Hardware specification: base mounting type (standard).
Interface: MECHATROLINK-III communication command type (rotary servo motor).
Function: support 125 s communication cycle.
High performance sigma shaped -V-EX series SGMGH-09A2C2E
2 models of high performance servo unit.
EX001 (support M- III high speed communication): the communication cycle is the minimum value of 125 s, which makes the response of the instruction becomes faster, and the track accuracy and processing ability are improved.
EX002 (no deviation of the specification): greatly improve the command tracking performance, and further improve the accuracy of trajectory control. Large capacity SGMVV type servo motor.
Rated output: 45KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (without keyway and screw).
Optional parts: with hold brake (DC24V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSGMCS small capacity type of direct drive servo motor.
Rated torque: M \/ 35N.
Servo motor outside diameter size: 175mm.
Serial encoder: 20 bit Delta (optional).
Design sequence: the outer diameter of the servo motor is marked as B, C and D.
Flange specification: face C, reverse load side.
Optional specifications: no matching.
Under the condition of no speed reducer, the load is directly driven.
Can be realized from low speed to high speed of the strong smooth running
(instantaneous maximum torque: 6 ~ 600N \/ m, maximum speed: 250 ~ 500r\/min).
By using 20 bit high resolution encoder, the high precision can be carried out.
The use of hollow structure, convenient wiring and piping.
Use example:
Semiconductor manufacturing equipment.
Liquid crystal circuit board manufacturing equipment.
Various inspection and test equipment.
Electronic part packaging machine.
IC information processor.
IC inspection equipment.
A variety of automated machinery.
Robot。
Small capacity ratings and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: A.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP42 (except for the rotating part of the output shaft).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMGH-09A2C2E Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGH-09A2C2E&select=5


...more relevant model market price >>>>
Related products
Yaskawa
servo motor
SGMGH-05ACA3D
Yaskawa servo motor SGMGH-05ACA3D
Servo motor SGMGH type. Rated speed: 150
Yaskawa
servo motor
SGMGH-44A2A2C
Yaskawa servo motor SGMGH-44A2A2C
Servo motor SGMGH type. Rated speed: 150
Yaskawa
Motor for high precision machine tool
SGMGH-20A2D3E
Yaskawa Motor for high precision machine tool SGMGH-20A2D3E
Servo motor SGMGH type. Rated speed: 100
Yaskawa
servo motor
SGMGH-15ACA6C
Yaskawa servo motor SGMGH-15ACA6C
Servo motor SGMGH type. Rated speed: 150