LK Automation Limited LK Automation Limited
Brand Sort: Yaskawa
Home >> Price
SGMGH-12A2D3C Market price | SGMGH-12A2D3C Introduction
  • Brand: YASKAWA
  • Country:
  • Name: Motor for high precision machine tool
  • Model: SGMGH-12A2D3C
  • Price: 0
  • >
YASKAWA SGMGH-12A2D3C
Sigma -v series servo unit SGDV.
Maximum applicable motor capacity: 2kw.
Power supply voltage: three phase AC400V.
Design sequence: A type.
Interface: MECHATROLINK- III communication command type (rotary servo motor).
Optional (hardware): DB resistance external type.
Realize real time communication
With the maximum transmission speed of 100Mbps and the set of communication cycle 125S ~ 4ms, to achieve a more than 62 stations of the high speed control SGMGH-12A2D3C
Through the high speed of communication, can send and receive all kinds of control information in real time.
Contribute to cost savings
A maximum of 62 stations can be connected to the communication line, can significantly reduce wiring costs and time.
The command connector of the upper controller only needs 1,
Pulse generator for D/A converter or position instruction without speed / torque command.
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronization phase control.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly.Sigma -V series servo motor SGMAV.
Rated output: 0.4KW (400W).
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: no matching.
Super power rate.
Small capacity.
Ultra low inertia
Instantaneous maximum torque (rating 300%).
Equipped with a high resolution serial encoder (20 bit).
Max speed up to 6000r\/min.
Variety is complete (50W ~ 1.0kw, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot,
Handling machinery,
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMGH-12A2D3C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGH-12A2D3C&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Motor for high precision machine tool
SGMGH-13A2C2S
Yaskawa Motor for high precision machine tool SGMGH-13A2C2S
Servo motor SGMGH type. Rated speed: 150
Yaskawa
servo motor
SGMGH-44A2A2S
Yaskawa servo motor SGMGH-44A2A2S
Servo motor SGMGH type. Rated speed: 150
Yaskawa
Motor for high precision machine tool
SGMGH-12ACD6B
Yaskawa Motor for high precision machine tool SGMGH-12ACD6B
Servo motor SGMGH type. Rated speed: 100
Yaskawa
servo motor
SGMGH-30A2B6S
Yaskawa servo motor SGMGH-30A2B6S
Servo motor SGMGH type. Rated speed: 100