LK Automation Limited LK Automation Limited
Brand Sort: Yaskawa
Home >> Price
SGMGV-44D3C6D Market price | SGMGV-44D3C6D Introduction
YASKAWA SGMGV-44D3C6D
Large capacity SGMVV type servo motor.
Rated output: 22KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit absolute value type.
Rated speed: 800r\/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products SGMGV-44D3C6D
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMSV.
Rated output: 3.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC24V).
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationServo driver SGD7S.
Maximum applicable motor capacity: 1.0kW.
Voltage: three phase AC200V.
Interface: MECHATROLINK-II communication command type.
Design sequence: A.
Hardware options: paint.
Performance excellence.
The performance and speed of the device can be improved.
Upgrade free adjustment function.
Without adjusting the operation, no vibration can be achieved.
To ensure that the procedures and parameters of the previous product compatibility.
After replacement of the product, can easily improve the performance of the device.
Sigma -7 series has rich models and related products.
Customers can easily build the system.
From selection to maintenance, rich service content.
Especially when the servo system is in trouble,
Can immediately grasp the product information in the field.
It is helpful to the servo performance of ultra high speed and ultra precision control.
Maximize the performance of the device, to solve the problem
SGMGV-44D3C6D Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGV-44D3C6D&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Rotary servo motor
SGMGV-44DDA6E
Yaskawa Rotary servo motor SGMGV-44DDA6E
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-20ADC6B
Yaskawa Rotary servo motor SGMGV-20ADC6B
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-20ADA21
Yaskawa Rotary servo motor SGMGV-20ADA21
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-05ADA61
Yaskawa Rotary servo motor SGMGV-05ADA61
Sigma -V series servo motor SGMGV. Rated