LK Automation Limited
Brand:
Yaskawa
SGDV-260D25A002000 | Yaskawa Servo driver for linear servo motor SGDV-260D25A002000
Yaskawa SGDV-260D25A002000 Product information and technical parameters：
Brand: Yaskawa
Name: Servo driver for linear servo motor
Model: SGDV-260D25A002000
Sigma -v series servo unit SGDV.
Maximum applicable motor capacity: 7.5kw.
Power supply voltage: three phase AC400V.
Design sequence: A type.
Interface: MECHATROLINK- III communication command type (linear servo motor).
Matching (hardware): paint.
Realize real time communication
With the maximum transmission speed of 100Mbps and the set of communication cycle 125S ~ 4ms, to achieve a more than 62 stations of the high speed control.
Through the high speed of communication, can send and receive all kinds of control information in real time.
Contribute to cost savings
A maximum of 62 stations can be connected to the communication line, can significantly reduce wiring costs and time.
The command connector of the upper controller only needs 1,
Pulse generator for D/A converter or position instruction without speed / torque command.
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronization phase control.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly.
Equipped with DeviceNet communication function type servo unit (external power drive type)
Maximum applicable motor capacity: 1.5kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Match (hardware): paint.
Matching (software): standard Yaskawa SGDV-260D25A002000.
Match (parameter): standard.
Optional modules: DeviceNet module (external power driver) SGDV-260D25A002000
Specification for open field network communication based on DeviceNet.
The combination of the DeviceNet field bus controller and the V can be implemented in a simple way for motion control.
Can make use of the city''s rich DeviceNet support software.
Can use the upper controller to manage the servo information Yaskawa SGDV-260D25A002000.
Monitor the running status of the servo drive system from the host controller through the network.
Using the upper computer to manage the servo information, improve maintenance (shorten the debugging time, improve the efficiency of maintenance operations).
Save wiring, reduce cost, improve reliability.
Because the upper controller and the servo unit are connected through the communication network, the connection is greatly saved Yaskawa SGDV-260D25A002000.
Built in rich positioning function.
Can be from the upper controller (programmable controller or computer) on a variety of simple positioning action.
Equipped with simple positioning, continuous rotation, and return to the origin of the continuous rotation movement, positioning, running and other rich positioning function.Sigma -V series servo motor SGMGV.
Rated output: 450W (0.45KW).
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC24V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat rresistance grade: F SGDV-260D25A002000.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGDV-260D25A002000.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Maximum applicable motor capacity: 1.5kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Match (hardware): paint.
Matching (software): standard Yaskawa SGDV-260D25A002000.
Match (parameter): standard.
Optional modules: DeviceNet module (external power driver) SGDV-260D25A002000
Specification for open field network communication based on DeviceNet.
The combination of the DeviceNet field bus controller and the V can be implemented in a simple way for motion control.
Can make use of the city''s rich DeviceNet support software.
Can use the upper controller to manage the servo information Yaskawa SGDV-260D25A002000.
Monitor the running status of the servo drive system from the host controller through the network.
Using the upper computer to manage the servo information, improve maintenance (shorten the debugging time, improve the efficiency of maintenance operations).
Save wiring, reduce cost, improve reliability.
Because the upper controller and the servo unit are connected through the communication network, the connection is greatly saved Yaskawa SGDV-260D25A002000.
Built in rich positioning function.
Can be from the upper controller (programmable controller or computer) on a variety of simple positioning action.
Equipped with simple positioning, continuous rotation, and return to the origin of the continuous rotation movement, positioning, running and other rich positioning function.Sigma -V series servo motor SGMGV.
Rated output: 450W (0.45KW).
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC24V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat rresistance grade: F SGDV-260D25A002000.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGDV-260D25A002000.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
...More relevant models >>>>