LK Automation Limited
Brand:
Yaskawa
SGMVV-5EDDBLF | Yaskawa Large capacity servo motor SGMVV-5EDDBLF
Yaskawa SGMVV-5EDDBLF Product information and technical parameters：
Brand: Yaskawa
Name: Large capacity servo motor
Model: SGMVV-5EDDBLF
Large capacity SGMVV type servo motor.
Rated output: 55KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: keep the brake (DC90V), with dust.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happen
Index function type servo unit (box type).
Maximum applicable motor capacity: 0.4kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Matching (hardware): basic installation type (standard).
Matching (software): standard.
Match (parameter): standard Yaskawa SGMVV-5EDDBLF.
Optional module: index module.
Ordinary。
Through programming and serial programming, easy to achieve motion control SGMVV-5EDDBLF
Can also be installed in the Windows environment to support the tool (sigmawin +) start easily.
The I / O module can be simply connected to the controller.
Smart.
Support the operation of the main purpose of the positioning of the operating table based on the.
The maximum number of programmable positioning points to 256 points Yaskawa SGMVV-5EDDBLF.
With external positioning, jogging speed table operation, the origin of the reversal, rich features, such as programmable signal output.
Input I / O points: 19 points, output: 16 points.
Fast.
High speed and high precision positioning of high performance V series combination.
Motion control can be achieved without the use of motion controller Yaskawa SGMVV-5EDDBLF. Sigma -V series servo motor SGMJV.
Rated output: 0.75KW (750W).
Power supply voltage: AC200V.
Serial encoder: 13 bit Delta (standard).
Design sequence: standard.
Shaft end: with two side plane seat (optional).
Optional: with oil seal.
Medium inertia.
Instantaneous maximum torque (rating 350%).
Equipped with a high resolution serial encoder (13\/20 bit).
Max speed up to 6000r\/min.
Variety is complete (50 ~ 750W, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot，
Handling machinery，
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Innstallation method: flange type SGMVV-5EDDBLF.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGMVV-5EDDBLF.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Maximum applicable motor capacity: 0.4kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Matching (hardware): basic installation type (standard).
Matching (software): standard.
Match (parameter): standard Yaskawa SGMVV-5EDDBLF.
Optional module: index module.
Ordinary。
Through programming and serial programming, easy to achieve motion control SGMVV-5EDDBLF
Can also be installed in the Windows environment to support the tool (sigmawin +) start easily.
The I / O module can be simply connected to the controller.
Smart.
Support the operation of the main purpose of the positioning of the operating table based on the.
The maximum number of programmable positioning points to 256 points Yaskawa SGMVV-5EDDBLF.
With external positioning, jogging speed table operation, the origin of the reversal, rich features, such as programmable signal output.
Input I / O points: 19 points, output: 16 points.
Fast.
High speed and high precision positioning of high performance V series combination.
Motion control can be achieved without the use of motion controller Yaskawa SGMVV-5EDDBLF. Sigma -V series servo motor SGMJV.
Rated output: 0.75KW (750W).
Power supply voltage: AC200V.
Serial encoder: 13 bit Delta (standard).
Design sequence: standard.
Shaft end: with two side plane seat (optional).
Optional: with oil seal.
Medium inertia.
Instantaneous maximum torque (rating 350%).
Equipped with a high resolution serial encoder (13\/20 bit).
Max speed up to 6000r\/min.
Variety is complete (50 ~ 750W, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot，
Handling machinery，
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Innstallation method: flange type SGMVV-5EDDBLF.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGMVV-5EDDBLF.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
...More relevant models >>>>
Related download